STALEKS EXPERT 20 TYPE 2
Double-ended curette

• Pedicure pusher (double-ended curette).

• The working part "curette" is used for partial removal of dry calluses and work with an ingrown nail.

• Anatomically convenient shape: the curve of the curette follows the shape of the nail plate.

• Professional manual sharpening.

• Corrugated handle improves the fixation of the tool in the hand of the technician.

• Additional resistance to corrosion due to polishing with GOI paste.

• High-alloy stainless steel.

• Resistant to sterilization in a dry heat oven and autoclave.

• Can be subject to disinfection with special agents.

• Recommended for pedicure.

Pedicure pushers: Before the procedure, soften the skin of the feet in warm water or a special foot bath. Carefully treat the keratinized areas of skin around the nail, moving smoothly without applying excessive pressure to avoid injuring healthy skin. After use, thoroughly clean the tool and follow the recommended storage and care instructions.

Store in a dry, ventilated place, out of reach of children, at a distance of at least 1 m from heating devices, at a temperature not lower than +5°C and not higher than +25°C and relative humidity up to 80%. Use as intended; after use, keep clean and dry. Do not use acids or alkalis for disinfection and sterilization. Do not use abrasive or metal objects for cleaning. Avoid dropping onto hard surfaces and contact with corrosive-active substances.