STALEKS EXPERT 51 TYPE 1
Straight flat and loop pusher

• Manicure pusher (pusher + ring).

• The working part "pusher" is designed to lift and push back the cuticle for its further removal.

• The working part "ring" is intended for the safe removal of a pterygium from the surface of the nail.

• Standard pusher size for the narrow and medium nail plate.

• Pleasant to the touch matte surface of the tool.

• Professional manual sharpening.

• Corrugated handle improves the fixation of the tool in the hand of the technician.

• Additional resistance to corrosion due to polishing with GOI paste.

• High-alloy stainless steel.

• Resistant to sterilization in a dry heat oven and autoclave.

• Can be subject to disinfection with special agents.

• Recommended for a manicure.

Manicure pushers: Before use, prepare the skin by softening the cuticle in warm water or with a special product. Use one side to push back the cuticle and the other to remove pterygium residue or clean the free edge of the nail. After use, thoroughly clean the tool and follow the recommended storage and care instructions.

Store in a dry, ventilated place, out of reach of children, at a distance of at least 1 m from heating devices, at a temperature not lower than +5°C and not higher than +25°C and relative humidity up to 80%. Use as intended; after use, keep clean and dry. Do not use acids or alkalis for disinfection and sterilization. Do not use abrasive or metal objects for cleaning. Avoid dropping onto hard surfaces and contact with corrosive-active substances.