STALEKS EXPERT
Carbide nail drill bit rounded cylinder blue, head diameter 5 mm, working part 13 mm

• Carbide nozzle for hardware manicure/pedicure.

• Blue notch of medium hardness.

• Shape "rounded cylinder" for the correction of artificial nails, for quick and safe removal of hyperkeratosis and a thickened edge in manicure.

• Removal of artificial material (gel polish).

• Removal of part of the nail plate in pedicure/podology.

• Processing of foot hyperkeratosis.

• Processing of cornification and calluses.

• High-quality metal.

• Can be subject to all types of sterilization and disinfection.

• Corrosion resistant.

Install the nail drill bit into the manicure device according to the device instructions; use it (if necessary) to remove artificial coating from the nail plate, shape and correct artificial nails, remove excess material and prepare natural nails for reapplication of coating, as well as to polish rough skin around the nail plate; then remove the drill bit from the device.

Store in a dry, ventilated place, out of children's reach, at a distance of at least 1 m from heating devices, at a temperature not lower than +0°C and not higher than +40°C, and relative humidity 80%. Use as intended; after use, keep it in a clean and dry state. Do not use acids and alkalis for disinfection and sterilization. It is forbidden to use abrasive and metal objects for cleaning. Avoid dropping on a hard surface and contact with corrosive-active impurities. Resistant to all types of disinfection and sterilization without loss of quality.